Heat pumps in Denver, CO & nearby towns
Heat Pump Installation in Broomfield, CO
Heat Pump Installation Denver is a free referral service that connects you with one insured local installer for a free, no-obligation heat pump installation estimate at your Broomfield address. Call (303) 529-8713 or use the form. The building codes in Broomfield changed this spring. Most houses here are also young enough that the conversion conversation goes a little differently than it does in older neighborhoods. Here's what to know before anyone walks through your door.
- Free installation estimate
- Insured local installer
- No obligation
Free Heat Pump Estimate
The installer sees your house, then quotes. No obligation.
Insured Local Heat Pump Installer
We connect you with one independent Denver-area installer
One Call, Not a Call List
Your details go to one installer, not a pile of sales calls
On April 15, 2026, the City and County of Broomfield put a new set of codes into effect. Ordinance 2295 adopted the 2024 International Codes, including the Mechanical Code, plus the Colorado Low Energy and Carbon Code. If your heat pump goes in now, that's the rulebook the work answers to.
What does that mean for your project, line by line? We won't guess at code sections here, and you shouldn't let a salesperson guess either. The useful move is simple. When an installer hands you a proposal, ask how it meets the code Broomfield has in force today. A good answer is specific. A vague one ("we do this all the time") tells you less than you would like.
One more check before any of this applies to you. Permit rules follow the exact parcel, so confirm your address actually sits within the City and County of Broomfield. If it does not, the rules of a different building department apply, and nothing on this page should be read as describing them.
Does a heat pump conversion get the quick permit lane?
Broomfield handles homeowner permits a bit differently than a lot of places. Applications are emailed to the Building division instead of submitted through the online portal. And there is a fast track for simple jobs: A/C and furnace replacements with no modifications typically take 1 to 2 business days.
Here's the catch. A heat pump conversion isn't automatically a no-modification swap. Pulling out a furnace-and-air-conditioner pair and putting in a heat pump can mean a new electrical circuit, new refrigerant lines, a different outdoor unit, or changes to controls. Work that goes beyond a straight replacement follows the published Broomfield review timelines instead of the quick turn.
So ask two questions early:
- Who is filing the permit, you or the installer?
- Does this project qualify for the quick-turn path, or will it go through regular review?
Better to hear "regular review" at the kitchen table than a week before your install date.
Is a house built around 2002 easier to convert?
Often, yes. Broomfield has the newest housing of any town we cover. Per the Census ACS 2024 5-year estimates, the median home here was built in 2002, and 28.8% of the 33,202 housing units went up between 2010 and 2019. Another 23.1% date from 2000 to 2009.
That tends to work in your favor. Newer ductwork and electrical panels often make a conversion simpler than it would be in a house from the 1950s. Simpler isn't the same as automatic, though. A 2015 house can still have a panel with no open space, ducts sized around a furnace that was bigger than it needed to be, or a side yard where roof snow lands exactly where the outdoor unit wants to sit. It happens.
Not every house matches the median, either. About 13.0% of homes in Broomfield were built in the 1970s. If yours is one of them, expect the installer to spend more time on the panel and the ducts. That's normal. It isn't a red flag.
The installer's checklist, even for a newer house
A proper estimate isn't a glance at the sticker on the old unit. Here's what a good visit covers:
- A room-by-room heating and cooling load calculation (Manual J), not "match what's there now."
- A look at whether your existing ducts can carry a ducted heat pump, or whether ductless indoor heads make more sense for part of the house.
- A check of the electrical panel: its capacity, and whether a new circuit is needed.
- Outdoor unit placement, with snow, drainage and clearance in mind.
- The route for the refrigerant lines and the path the condensate water takes.
You'll also make a real choice: all-electric, or dual-fuel, which keeps a gas furnace as backup. Cold-climate models are built to keep heating in sub-zero weather. If you care about rebates, ask whether the proposed unit meets the Xcel cold-climate spec, which per the 2026 Xcel rebate summary requires, among other things, a COP of at least 1.75 at 5°F and 5°F capacity of at least 70% of its 47°F capacity.
Where the 2026 money stands
In short, as of September 2026:
- For air-source heat pumps installed on or after Jan. 1, 2026, the Colorado heat pump tax credit is $1,000, claimed by the contractor. You're guaranteed at least $333 of it, shown on your invoice as "State of Colorado Heat Pump Discount." Only state-registered contractors can claim it, so ask whether your installer is on the list.
- If Xcel is your utility, a qualifying ducted or mixed cold-climate air-source heat pump earns $750 per heating ton at 5°F, or $1,500 with the bonus, per Xcel's 2026 rebate summary effective Oct. 1, 2026. The bonus needs an invoice dated in 2026 and is not available if your current primary heat is electric. These rebates require an Xcel participating contractor.
- The federal IRS home improvement credit covered installs through Dec. 31, 2025, so a 2026 install doesn't qualify. Ask a tax professional about your own situation.
- The state income-qualified rebate is closed for single-family homes on the Front Range, Broomfield included, per the August 2026 update from the Colorado Energy Office.
Confirm your eligibility with your utility or installer. Details are on our heat pump rebates page, and pricing context is on the heat pump cost guide.
What happens after you call or fill out the form?
You tell us a little about the house. We connect you with one insured local installer. That's it: one, not a bidding list.
The installer visits, looks at your ducts, panel and yard, and sets the price after seeing the house. The estimate is free and there's no obligation to go ahead. We're a referral service. We aren't the contractor, the utility, a government program or an energy advisor, and we don't set prices.
Ready? Call (303) 529-8713 or Get Free Estimate. If your address turns out to be just outside Broomfield, check every town we cover or the heat pump installation page for Arvada.
Ask Away
Heat Pump Installation Questions
Who handles heat pump permits for a Broomfield address?
If the parcel is in the City and County of Broomfield, permit applications go to its Building division by email rather than through the online portal. Permit rules follow the exact address, so confirm which jurisdiction the parcel is in first. Ask your installer who will file the permit before you sign anything.
Does Broomfield's April 15, 2026 code change affect a heat pump install?
The City and County of Broomfield adopted the 2024 International Codes, including the Mechanical Code, plus the Colorado Low Energy and Carbon Code, effective April 15, 2026. Those are the codes in force for work done now. Ask any installer how their proposal meets current code.
Will my Broomfield heat pump permit come back in one or two business days?
Maybe not. Broomfield says A/C and furnace replacements with no modifications typically take 1 to 2 business days, but a heat pump conversion isn't automatically a no-modification swap. Ask whether your project qualifies for the quick-turn path, because other work follows the published Broomfield review timelines.
My Broomfield house was built in the 2010s. Does it still need a full assessment?
Yes. About 28.8% of Broomfield housing units were built between 2010 and 2019 (Census ACS 2024 5-year estimates), and newer ducts and panels often make a conversion simpler. The installer should still run a room-by-room load calculation and check the panel, ducts and outdoor unit location. For a free, no-obligation estimate from one insured local installer, call (303) 529-8713.
Thinking about a heat pump?
We'll connect you with one local, insured heat pump installer. They see the house, then set the price. No obligation to buy.